RSS

Technical Training

Technical Training

2015 Stamp Plan Year

 
 

 

Shielded Metal Arc Welding (SMAW) – Plate

This 8-hour course will expose the participant to Shielded Metal Arc Welding (SMAW).  Welding in flat, horizontal, vertical and overhead applications will be available to the participant with particular emphasis being placed on stick or SMAW in the vertical position using 3/8″ structural plate.

The participant will spend approximately 3 hours in the classroom and 5 hours in the weld shop and will perform welding operations in several positions.  Particular emphasis will be placed on electrode selection, equipment setup, electrode position and manipulation and various weld discontinuities.  Each participant will be allowed to practice and weld in their position where they and the Instructor feel the most need is using 3/8″ structural plate.

8-Hour Course – 1 Saturday:

Time – 8:00 am to 4:30 pm (30-minute lunch)

Saturday, January 31, 2015
Saturday, February 21, 2015
Saturday, March 7, 2015
Saturday, April 11, 2015
Saturday, April 18, 2015
Saturday, May 2, 2015
Saturday, May 30, 2015

 

 

Cutting Applications & Procedures

This 8-hour course will expose the participant to cutting aspects of Oxyfuel, Plasma Arc Cutting & Gouging and Air Carbon Cutting and Gouging.  The various safety aspects of each process will be reviewed as well as various equipment applications of each process.

The participant will spend approximately 3 hours in the classroom and 5 hours in the weld shop and will perform cutting operations in all cutting aspects.  Oxyfuel using acetylene and propylene fuel types, Plasma cutting, Plasma gouging, Air Carbon Cutting and Air Carbon Gouging.  In addition procedures on plate cutting will involve both hand torch and track torch and a pipe beveler will be used.

8-Hour Course – 1 Saturday:

Time – 8:00 am – 4:30 pm (30-minute lunch)

Saturday, February 7, 2015
Saturday, March 21, 2015
Saturday, May 9, 2015

 

 

Flux-Cored Arc Welding (FCAW) – Gauge

This 8-hour course will expose the participant to Flux-cored Arc Welding (FCAW).  Welding in flat, horizontal, vertical and overhead applications will be available to the participant with particular emphasis being placed on FCAW in the vertical position using light gauge metal.

The participant will spend approximately 3 hours in the classroom and 5 hours in the weld shop and will perform welding operations in several positions.  Particular emphasis will be placed on machine setup, electrode classification, position and manipulation and various weld discontinuities.  Welding light gauge metal to light gauge metal and light gauge metal to 3/8″ plate will be reviewed and practiced.  Each participant will be allowed to practice and weld in their position where they and the Instructor feel the most need is.

8-Hour Course – 1 Saturday:

Time – 8:00 am to 4:30 pm (30-minute lunch)

Saturday, May 16, 2015

 

 

Construction Master Pro Calculator

8-Hour Class – Tuesday & Thursday nights:

Time – 6:00 pm to 10:00 pm:

Tuesday, February 10, 2015
Thursday, February 12, 2015

 

 

Intermediate Transit

24-Hour Class – 3 Tuesday & 3 Thursday nights:

Time – 6:00 pm to 10:00 pm:

Tuesday, March 10
Thursday, March 12
Tuesday, March 17
Thursday, March 19
Tuesday, March 24
Thursday, March 26
 
 
 
 

UBC Rigger & Signaler (CRS)  –  ENROLLMENT DEADLINE MARCH 2

40-Hour Class – 3 Tuesday nights, 3 Thursday nights & 2 Saturdays:

Time – Nights = 6:00 pm – 10:00 pm  –  Saturdays = 8:00 am – 4:30 pm (30-minute lunch)

Tuesday night, April 7
Thursday night, April 9
Tuesday night, April 14
Thursday night, April 16
Saturday day, April 18
Tuesday night, April 21
Thursday night, April 23
Saturday day, April 25
 
 
 
 

Mechanical Training 

The Southeast Missouri Carpenters are part of the Southeast Missouri Regional Industrial Training Group which consists of local industries who have joined together to provide industrial skills training.  The core of the curriculum is in Industrial Maintenance and many facets that a Millwright encounters are covered in great detail.  Listed below is the entire list of classes and when the classes will be offered.  Enrollment is limited only to those that are interested in the entire curriculum.

Fall 2015                                                       Spring 2016

Math & Calculations                                            Precision Measuring
Blueprints                                                           Lubrication – Bearings, Reducers, Gear Drives
Bearings – Shaft Failure Analysis
 
 

Fall 2016                                                       Spring 2017

Belts, Chains – Troubleshooting                          Pumps, Cams, Ball Screws
Gears, Reducers, Clutches & Brakes                  Fluid Power – Laws, Schematics
Shaft Alignment w/ Indicators & Laser                 Fluid Power – Motors, Valves & Pumps
 
 

Fall 2017                                                       Spring 2018

Pneumatics                                                       Welding
Safety – Lock Out/Tag Out, etc.
 

The classes are offered at night at the Cape Girardeau Career and Technology Center and all costs are paid by the Apprenticeship Program of the Southeast Missouri Carpenters; as long as the class is completed and a passing grade is achieved.  The first class is Math & Calculations and starts in mid August on a weeknight, from 6:00 pm to 10:00 pm for twelve weeks.

If you are interested in this Mechanical Training and want to be enrolled in this curriculum please notify us by calling 573-335-1936 or outside Cape area call 1-800-300-1886 and leave a voice mail message, if after hours.

 
 
 

Machine Tool Class:

A basic Machine Tool class offered through the SEMO Regional Industrial Training Group and associated with Mineral Area College is being offered.  This class is being held on Tuesday nights from 5:30 pm to 9:30 pm and runs from mid August through late November, for 15 weeks.  The class is taught at Southeast Missouri State Universities Polytech Lab and 3 hours of College credit is available through Mineral Area College.  A second, Advanced Machine Tool class will be offered in the spring of 2016.

The curriculum for both the Basic course and the Advanced course is listed below.  If you have an interest in this course please contact Bruce Bird at 573-335-1936 or 1-800-300-1886 or via email at Lbruceb@msn.com .

 
 
 
 

–  No cost to any member who completes and passes the class  –

 All Courses are held at Carpenters Hall in Cape Girardeau, Missouri

TO REGISTER FOR A CLASS – CALL LISA AT 573-335-1936 OR 1-800-300-1886

Advertisements
 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

 
%d bloggers like this: